187
Chapter 4, Description of Fields
Fields
BW=
This field displays the resolution bandwidth of the CDMA spectrum analyzer.
Operating Considerations
This field is coupled to the Span field’s setting.
Range of Values
•1 kHz
•3 kHz
• 30 kHz
Screens Where Field is Present
CDMA REVERSE CHANNEL SPECTRUM
by # errors
When this field is On, the mobile station reports FER at least as often as the
number of errors entered in the numeric entry portion below On/Off.
The numeric entry portion of the by # errors field is field is not displayed when
this selection is
Off.
GPIB Example
“DISP CFER;CDMA:MOBile:FERasure:REPort:BY:ERRors:STATe: ’ON’“
causes the mobile station to report FER whenever the number of errors counted by
the mobile station reaches the value entered by the command below.
“DISP CFER;CDMA:MOBile:FERasure:REPort::BY:ERRors 5“
causes the mobile station to report FER if the FER count reaches 5 within the num-
ber of frames specified in the MS FER Report Interval.
Operating Considerations
If by # frames is On, it is possible that mobile station reported FER will occur
more frequently than the error count specified in
by # errors.
Range of values: 1 through 15
See Also
by # frames
field description, on page 188
Screens Where Field is Present
CDMA MOBILE REPORTED FER
