Filter
Top Products
26
To delay the start using delay start time:
1. Press AUTO CLEAN.
This will automatically set a 3
1
⁄2-hour Self-
Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
⁄2 hour before the cycle is over.
2. Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1
⁄2 hours, use the Hour and Minute
pads to set the cleaning time you want. Press
the “up” (s) or “down” (t) pad(s) until a time
between 2
1
⁄2-4
1
⁄2 hours shows on the display.
•
Use 2
1
⁄2 hours for light soil.
•
Use 3
1
⁄2-4
1
⁄2 hours for average to heavy soil.
3. Press DELAY START TIME.
4. Set the start time.
Press the “up” (s) or “down” (t) pad(s) until the
correct time shows on the display. The oven will
automatically come up with the stop time by
adding the set cleaning time to the set start
time.
5. Press START/ENTER.
The door will lock as soon as you press
START/ENTER.
6. After the Self-Cleaning cycle starts:
7. After the Self-Cleaning cycle ends:
LOCKED goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.
SETTING THE CONTROLS (CONT.)
PRESS YOU SEE
AUTO
CLEAN
CLEAN
TIME
PRESS YOU SEE
(example for 4
1
⁄2-hour cycle)
HR MIN
CLEAN
TIME
PRESS YOU SEE
DELAY
START
TIME
START
CLEAN
TIME
HR MIN
START
CLEAN
TIME
(example for 2:30 start time)
PRESS YOU SEE
START
ENTER
5 SEC
O
N
DELAY CLEAN
YOU SEE
O
N
HEAT
DTIME
CLEAN
TIME
LOCKED
YOU SEE
CLEAN
PRESS YOU SEE
USING THE SELF-CLEANING CYCLE