Filter
Top Products
19
Setting up your washing machine
Connecting the hot water supply hose (selected models)
1. Connect the red L-shaped arm tting (A) for the hot water
supply hose to the hot water supply intake at the back of the
machine. Then tighten it by hand.
2. Connect the other end of the hot water supply hose to your sink’s
hot water tap in the same way as you connected the cold water
supply hose.
To use only cold water, use the Y-piece.
A
Connecting the aqua hose (selected models)
The aqua hose was invented to ensure perfect leakage protection.
The aqua stop is attached to the aqua hose and automatically cuts the
water flow if the hose is damaged.
It also displays a warning indicator (A) on the aqua stop.
Connect the aqua hose by assembling the aqua stop on the tap as
shown.
A
F400E_WF70F5E_NonBubble-03262C-01_EN.indd 19 2013-01-18 �� 1:54:26