Filter
Top Products
ALIGNMENT AND ADJUSTMENTS
11
Board Input Test Mode
Denition of Board Input Test Mode:
- Board Input Test Mode is to displays a specied input after a key press.
How to Enter:
- To enter the Board Input Test Mode, press the Extra Rinse Key during Service Mode.
Board Input Test Mode:
1. Activate the Service Mode rst.
2. Press the Extra Rinse Key to start Board Input Test.
3. Turn the Jog-Dial so that the Normal Course LED is turned on. The Water Temperature will be
displayed in Celsius.
4. Turn the Jog-Dial to counter clockwise direction so that the Next Course LED is turned on. The
Water Temperature will be displayed in Fahrenheit.
5. Turn the Jog-Dial to counter clockwise direction so that the Next Course LED is turned on. The
door status will be displayed (OP if open, CL if closed).
6. Turn the Jog-Dial to counter clockwise direction so that the Next Course LED is turned on. The
Door Lock Switch status will be displayed (UL if unlocked, LO if locked).
7. Turn the Jog-Dial to counter clockwise direction so that the Next Course LED is turned on. The
Water Frequency will be displayed.
8. Turn the Jog-Dial to counter clockwise direction so that the Next Course LED is turned on. The
SilverCare Status will be displayed. (defualt : “--”)
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
WARNING
WF395BTP-03144B-01_EN.indd 11 2012-10-19 �� 2:05:56