Filter
Top Products
Building under a continuous work-
top / in a kitchen run
– A special building under conversion
kit* is required.
The machine lid must be replaced
by a cover plate. To ensure electrical
safety the cover plate must be fitted.
**
N.B.**
If you wish to push your machine under
a worktop and there is space to do this
without removing the lid, the conver-
sion kit is not necessary. Otherwise the
conversion kit is essential.
– For installation under a work surface
900/910 mm from the floor, a raising
kit* is required.
– Connections for electricity, water
and drainage should be installed in
such a way that they remain ac-
cessible when the machine is in
place.
Fitting instructions are supplied with the
conversion kit.
All parts marked* are available from the
Miele Spare Parts or Sales Department.
The fitting of cover plates and stack-
ing kits must only be undertaken by
qualified and competent persons, in
accordance with the instructions
supplied with the kit.
Washer and Dryer stack
A Miele tumble dryer can be stacked
with the washing machine. A stacking
kit* is necessary and can be pur-
chased from the Miele Spare Parts
Department.
Please note
a Safety distance to wall:
at least 2 cm
b Height: Stacking kit with
pull-out shelf:
approx. 169 cm
stacking kit without
pull-out shelf:
approx. 170 cm
Installation and connection
57