Filter
Top Products
Display
The following functions are shown in
the display:
– duration (Time remaining display)
– delay start
– programmable functions
Duration of the programme
If a programme without delay start has
been selected, the maximum duration
(wash time) of the programme in hours
and minutes will appear in the display
after the start of the programme.
In the:
– COTTONS
– MINIMUM IRON
– Mixed wash
programmes, the washing machine
measures the amount of water being
taken up by the laundry and uses this
to calculate the load during the first 10
minutes. If the machine recognises a
smaller load it will shorten the pro-
gramme time by up to 60 minutes. The
shortened time is achieved by, for
example, reducing the number of
rinses.
Soak
If a soak time has been selected, this is
added to the programme wash time in
the display to give a total running time.
Delay start
The delay start time selected will ap-
pear in the display.
After the machine has started, the
delay start time counts down. If the
delay start is over 10 hours, it will count
down by the hour. If it is less than 9
hours and 59 minutes it will count down
minute by minute.
Once the delay start period is com-
pleted the programme begins and the
actual programme duration shows in
the display.
Programmable functions
The programmable functions can be
used to tailor washing programmes to
suit your individual requirements. The
function selected is displayed in pro-
gramming mode.
Description of the appliance
12