Filter
Top Products
Problem solving guide
With the help of the following notes minor faults in the performance of the ap-
pliance, some of which may result from incorrect operation, can be put right with-
out contacting the Service Department.
Repair work to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national safety regulations. Un-
authorised repairs could be dangerous.
The chart is divided into the following sections to help you:
– The programme does not start.
– The wash programme stops and a fault indicator light comes on.
– A fault indicator light comes on but the wash programme continues as normal.
– General problems or an unsatisfactory wash result.
– The programme does not start.
Fault indicator Possible cause Remedy
The Anti-crease / Finish
indicator light is not on,
or the START indicator
light is not flashing.
There is no power.
Check that
– the mains plug is
plugged in.
– the fuse or circuit
breaker has not
tripped.
The check light locked
is flashing.
The system lock has
been activated.
Deactivate the system
lock.
The programme does
not start when Drain /
Final spin has been
selected.
The washing machine
has not been prepared
for using for the first time.
Prepare the machine as
described in “Before
using for the first time”.
Problem solving guide
43