Miele W2859iWPM SUPERTRONIC Washer User Manual


 
Fitting a plinth facing
The gap between the lower edge of the
washing machine plinth and the floor
can be closed up using a suitable
kitchen furniture plinth facing.
The washing machine plinth has a
special groove in which a plinth facing
can be fitted.
Plinth facing dimensions
Length
: 592 - 596 mm
Thickness
:8mm
Height (
H): The plinth facing height
must be calculated after aligning the
height of the machine with the screw
feet or after fitting the raising kit(s).
Installation
^
Calculate height (H) from the floor up
into the groove (on the underside of
the washing machine).
^ Cut the plinth facing to size.
^ Slide it into the groove.
Useful tip:
If the machine is fitted on a raising kit,
you can use double-sided adhesive
tape on the back of the plinth facing to
secure it to the raising kit.
Installation and connection
74