Miele W2859iWPM SUPERTRONIC Washer User Manual


 
Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above as this is the maximum
suitable for the programme.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select the Rinse hold extra option.
To start the final spin
:
Touch the Start sensor to begin the
final spin.
To end the programme
:
Press the / button. The water will
drain away. Press the / button
again to open the door.
To omit the spin between rinses and
the final spin
^ Set the spin speed to 0.
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the
anti-crease stage. With some
programmes an additional rinse is
introduced if this setting is selected.
Spinning
36
Programme rpm
Cottons 1600
Minimum iron 1200
Delicates 600
Automatic plus 1200
Dark garments 1200
Shirts 600
Denim 900
Express 20 1600
Woollens / 1200
Silks / 600
Sportswear 1200
Trainers 1000
Outerwear 800
Hygiene 1600
First wash 1200
Proofing 1000
Curtains 600
Pillows 1200
Soft toys 900
Starch 1600
Separate rinse 1600
Drain
Spin 1600