Filter
Top Products
The following fault messages appear in the display and the
programme stops
Fault message Possible cause Remedy
1)
2
Water inlet
fault
The water inlet is
blocked or
restricted.
Check whether
–
the stopcock is opened
properly.
–
the inlet hose is kinked.
–
the water pressure is too low.
2
Drain fault
–
The water outlet is
blocked or
restricted.
– The drain hose
has been fixed
too high.
–
Clean the drain filter and the
drain pump.
–
The maximum delivery head
is1m.
L
Waterproof
system has
reacted
The water protection
system has reacted.
– Close the stopcock.
– Call the Service Department.
;
Technical fault
F xxx
There is a fault. Start the programme again.
If the fault message appears
again, contact the Service
Department.
1)
To switch off the fault indicator: Switch the machine off with the K button.
Problem solving guide
53