Filter
Top Products
Problem Possible cause Remedy
The 8 DOS indicator
starts flashing before
the start of a
programme. The
programme cannot be
started.
Before trying to rectify the
problem, you must:
–
Turn the programme
selector to f (the fault
code goes out).
–
Switch the machine off with
the I-0 switch.
Fault code: Fdo:
The container for liquid
cleaning agent is empty.
Fill the container with liquid
cleaning agent or replace it
with a new, full container.
Then:
–
Switch the machine on.
– Start the programme
again.
A few minutes after the
start of a programme,
the 8 DOS indicator
flashes and the
programme is
cancelled.
Before trying to rectify the
problem, you must:
– Turn the programme
selector to f (the fault
code goes out).
– Switch the machine off with
the I-0 switch.
Fault code: Fdo:
Fault with the system for
dispensing liquid
cleaning agent.
Fill the container with liquid
cleaning agent or replace it
with a new, full container.
Vent the dispensing system;
see "Programmable
functions".
Then:
–
Switch the machine on.
–
Start the programme
again.
Problem solving guide
59