Filter
Top Products
~
To avoid the risk of damage to the
washer-disinfector and any accessories
used with it caused by chemical
agents, soiling and any reaction
between the two please read the notes
in "Chemical processes and
technology".
~
Where a chemical additive is
recommended on technical application
grounds (e.g. a cleaning agent), this
does not imply that the manufacturer of
the machine accepts liability for the
effect of the chemical on the items
being cleaned.
Please be aware that changes in
formulation, storage conditions etc.
which may not be publicised by the
chemical manufacturer, can have a
negative effect on the cleaning result.
~
When using chemical agents such
as cleaning agent it is essential that the
manufacturer's instructions are
followed. Only use chemical agents for
the purpose they are designed for as
specified by the manufacturer, to the
exclusion of other chemicals, to avoid
such dangers as chemical reactions
and material damage.
~
In critical applications where very
stringent requirements have to be met,
it is strongly recommended that all the
relevant factors for the process, such
as cleaning agent, water quality etc.
are discussed with Miele.
~
If cleaning and rinsing results are
subject to particularly stringent
requirements (e.g. chemical analysis,
specialised industrial processes etc.), a
regular quality control test must be
carried out by the user to ensure that
the required standards of cleanliness
are being achieved.
~
Mobile units, baskets and inserts
should only be used for the purpose
they are designed for.
Hollow instruments must be thoroughly
cleaned, internally and externally.
~
Empty any containers or utensils
before arranging them in the machine.
~
Do not allow any remains of acids or
solvents, and in particular hydrochloric
acid or chloride solutions, to get into
the wash cabinet. Similarly avoid any
materials with a corrosive effect.
The presence in compounds of any
solvents should be minimal (especially
those in hazard class A1).
~
To avoid any corrosion damage,
ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the stainless
steel outer casing of the machine.
~
After carrying out any work on the
mains water system, the water supply
system to the washer-disinfector must
be vented.
Otherwise, the components in the
machine may become damaged.
~
Please follow the advice on
installation in these instructions and the
separate Installation Instructions.
Warning and Safety instructions
8