Filter
Top Products
Report printer (Option)
Replacing the print paper
Replace the print paper, 2 ¼" (58 mm)
wide, when the red indicator lights in
the report printer.
^
Open and pull down the front panel
of the printer.
^
Take the empty roll together with its
spindle from the roll holder, fit the
new roll on the spindle and put it
back in place.
^ Cut the paper at an angle and guide
it up and over the paper transport
roller (slit behind the ribbon
cartridge). Press the green paper
transport button until the paper
reemerges above the ribbon
cartridge (see the illustration on the
inside of the front panel).
^ Guide the paper through the slit of
the front panel. Shut the front panel.
Replacement paper rolls, 2 ¼" (58 mm)
wide, outer diameter approx. 2"
(50 mm) can be obtained from Miele.
Replacing the ribbon cartridge
^
Open and pull down the printers front
panel.
^
Pull the ribbon cartridge (above the
paper roll) forward and out of its
holder and replace it with a new one.
The paper must be guided between
the ribbon and the cartridge housing.
^
Turn the small wheel for manual
ribbon transport on the right
clockwise until the ribbon is tight.
^
Cut the paper at an angle and guide
it through the slit of the front panel.
Shut the front panel.
,
Please refer to the installation
diagram supplied with the machine.
Replacement ribbon cartridges can be
obtained from Miele.
Maintenance
37