Filter
Top Products
Interrupting a program
A program can only be interrupted
or cancelled in operating levels B
or D.
If the door needs to be opened in
extreme cases, e.g. if items are moving:
In operating levels B or D
^
Press the "Stop" 7 button.
The program is interrupted.
>CANCEL< OR >CONTINUE< appears
in the display.
^
Open the door.
Important G 7828:
Which door can be opened will depend
on what setting has been programmed
under MACHINE FUNCTION / DOOR
MECH. (see the Programming manual).
The door on the unclean side can
always be opened, no matter which
parameter has been set.
The door on the clean side can only be
opened if one of the following
parameters are set:
– INTERLOCK,
– DOOR CLEAN+INTERLOCK,
– DOOR UNCLN.+INT.LOCK.
,
Caution! Water and items in the
machine may be hot. There is a
danger of burning or scalding.
^
Arrange the parts securely, observe
any protective measures.
^
Close the door.
^
Press the "Start" 6 button.
The program continues.
Operation
29