Filter
Top Products
Priming the liquid dispensing
systems
Before the machine is first used, and
later if one or more containers have
been allowed to empty, the dispensing
system(s) for liquid agents must be
primed.
^
Press the ON/OFF I-0 button.
^
Select operating level "B".
^
Select from the following as required:
Program DOS1-FILL
Program DOS2-FILL
Program DOS3-FILL
Program DOS4-FILL.
^ Press the "Start" 6 button.
The DOS-FILL Service Programs
were allocated by default to program
places 58-61, but they can also be
allocated to other program places.
Dispensing system
maintenance
To ensure safe function, the following
maintenance should be carried out by a
Miele Service Technician at specified
intervals.
Every 12-18 months:
Inspect the hoses of the dispensing
system(s). Replace if necessary.
External Dispensing systems
If external pumps are to be used for
dispensing liquid detergent, please
inform the Miele Technical Service
Department. The notes in the
Programming Manual under "Machine
functions" must be observed.
Adding liquid detergents and neutralizers
24