Filter
Top Products
Laboratory glassware (LG)
Wide-necked glassware, such as wide
necked erlenmeyer flasks and petri
dishes or glassware with a cylindrical
form, e.g. test tubes, can be cleaned
inside and out with the rotating spray
arm. General glassware such as
beakers, conical flasks, petri dishes,
test tubes, etc. can be arranged in full
size, half or quarter inserts in the higher
or lower levels.
Mobile injector units are available for
direct injection spraying of narrow
necked flasks, pipettes, etc.
The following instructions relate only to
basic preparation and loading of
glassware.
Loading the machine
Removing excess soils
^
Empty all glassware before loading
into the machine. Take any hygienic
measures necessary to avoid
infection.
,
Ensure that no acid or solvent
residues, especially hydrochloric
acid or chlorides get into the wash
cabinet.
^
Remove all agar residues from petri
dishes.
^ Remove blood clots and residues
from test tubes, etc.
^ Remove all stoppers, corks, labels,
sealing wax residues, etc.
^ Small parts such as stoppers and
taps should be secured in suitable
basket inserts.
E 940 Injector mobile unit
Contains two levels, for narrow necked
laboratory glassware (can also be used
without the upper level).
Application
21