Filter
Top Products
Filling the containers with liquid
agents
^
Turn the machine off using the power
switch.
^ Open the service panel and lift it up
and out at the bottom.
^
Take the storage container out of the
unit, open it and fill with the agent
required (observe the color code).
^
Place the siphon tube from the
detergent dispensing pump firmly
into the container opening (observe
the color code).
Once the storage containers have been
filled the message clears.
Remember to refill the containers in
a timely manner, they should not be
emptied completely.
If the container is not in use, the refill
function for the dosage system not
used can be shut off and a
respective display message be
avoided (see "Machine function/
Dispensing - Query container" in the
Programming manual).
Adding liquid detergents and neutralizers
23