Filter
Top Products
Cleaning the spray arms
The spray arm jets can get clogged.
Check daily and clean if necessary.
^
Use a sharp pointed object to push
particles into the spray arm jets and
rinse thoroughly under running water.
^
Remove the mobile unit.
Labwasher spray arms
^ Loosen the nut with a 60 mm wrench
and pull the spray arm upwards or
downwards respectively.
Mobile unit / insert spray arms
^ Turn the nut with the spray arm
counterclockwise and pull the spray
arm downwards.
^
Refit the spray arms after cleaning in
the reverse order.
After replacing the spray arms
check that they rotate freely.
Maintenance
34