Filter
Top Products
SUNG THE CONTROLS
Control features vary by model=
Press the appropriate pad(s) to select one or more options.The indicator light above
the pad will illuminate when the option is selected=
Prewash (select models) - Can be selected with any cycle.Add detergent to the pre-
wash section of the detergent compartment.Washer fills with cold water and deter-
gent, tumbles for 25 minutes, then drains and advances to the selected cycle.
.... ii 8ta,rl
P_,'aSh} Trset
Stain Treat (select models) - Adds 5 minutes to the wash for better stain removal .....
Exera Rinse - Adds an additional rinse at the end of the cycle to more thoroughly f:
remove laundry additives and perfumes. ....................................................
_a
Rinse Spin
Extended Spin (select models) - Adds additional time to the spin to remove more ............................
water from the load.
Rinse and Spin - Use for loads that need rinsing only or to add rinse-added fabric &spinRinse OnuySP'n
softener to a load. ..................................................
Spin Only - Provides a spin to remove more water from the load.
Step
To start the washer, press the Cycle Selector diak Before the washer starts to fill,
it will make a series of clicking noises to check the door loci< and do a quick drain.
Changing a Cycle
If an incorrect cycle has been accidentally selected:
I. Press the Cycle Selector dial,
2.Turn the Cyc|e Selector dial to the desired cycle.
3, Set the desired options for the cycle,
4. Press the Cycle Selector dial,The Wash indicator
lights stop flashing and the new cycle starts=
Canceling a Cycle
To cancel a cycle:
I. Press the Power Off pad.
2. Select the Rinse and Spin or Spin Only option pad.
3. Press the Cycle Selector diaLThe Spin light illuminates
and the washer starts the rinse or spin.
© _ii_i!i!i;_i!!!!!!!!!_i!i!i!i!iiiilV!;ii;S;;¸¸i;__
Push DiOUto
Start / Pause
U
7