Filter
Top Products
1 4, Two people,one on each side, grasp and liftthe dryer onto the washer (seefigure 34), taking care not to
bend the tabs located towardsthe front of the washer. Slide the upper dryer towardthe rear makingsure
that the guides fall between the rails on the supportof the washer. (See figure35.)
WARNING: Make sure POWERIS NOT SUPPLIEDTO OUTLET during installation.
When placing the dryer onto the washer, makesure the POWERCORD IS NOT PINCHED between
the washer and the dryer or between the exhaust pipeand bracket. If the dryer cannot be pushed all
the way back, check to see if the power cord is being pinched between the back of the dryer and the
exhaust bracket.
Makesure that SHUT-OFF FOR UTILITIES(electric,gas and water) WILL BE ACCESSIBLE after the
applianceis installed.
Figure 34 Figure35
15.Check to make sure the tabs on the washer are engaged in slots at the front of the base of the dryer.
(See figures36 & 37 - some components removed for clarity.)
Front Right
Dryer
Base
O
Figure36 Figure37
Rotateforward to check engagement.
Page 17