Filter
Top Products
9. For nonalcove installations, utilities and
venting can be connected after units are
stacked.
For alcove installations:
Securethe exhaust bracketto the rear of the
washerwith screwsprovided.
(See figures 14, 15& 16.)
Unsnaphosesfrom plastic hosecaddy,leaving
caddyattachedto the back of the cabinet.
Connectfill hoses to faucets(hotwater hose is
the left hoseas youstandfacing the front of the
washer). Insertthe drain hosein the stand pipe
recommendedheightof 36 inches,minimumof
24 inches. Note: If drain hoseis not secure in
the standpipe, usea portionof the shipping
strapto securethe drainhoseto the stand pipe. Figure 14
Makesure that drainhose is securedto the hose
caddyafter installation. Fill hosesare not to
be securedto caddy. Turn on waterand checkfor leaks.
Moveunitinto position,leveland tightenthe levelinglock nutson the legs. Securethe ventpipe to the
exhaustbracket. (See figure 16.) MAKING SURE FIRSTTHATOUTLET IS NOT ENERGIZED,plug
washer intooutlet.
Figure 15 Figure 16
Page 12