Filter
Top Products
17
1
Press to activate your washer.
2
Select your wash cycle by turning the SmartTouch™ Control Dial.
3
Choose your wash options, if you wish to select options different from the default
options for thecycle.
4
Touch to start the cycle.
If you make an invalid selection the washer will beep at you.
When the cycle finishes, your washer will perform end of cycle beeps to alert you and
then turn off automatically.
If you wish to stop your washer at any point during a cycle, simply touch to pause
the cycle. There may be a slight delay while the drum comes to a stop, then the door
will unlock. Under certain conditions however the door will remain locked for safety
reasons (refer to the ‘Safety features’ section).
If you wish to cancel or change the wash cycle once a cycle has started, simply touch
the button then select the new cycle. Touch to restart the washer.
ImpORTANT!
For the best fabric and colour care, remove your clothes as soon as the cycle has
finished.
Failure to follow the advice in this guide may result in damage to your garments and
your expectations of wash performance may not be met.
GETTING STARTED QUICKLY
3 4