Filter
Top Products
24
Changing pre-set options
Wash temperatures
On the PRIDE model the WARM temperature can be adjusted if you think it is too hot or too cold.
Note: on these models the hot temperature will be the same as the hot water supply temperature.
On EXCELLENCE model all wash temperatures can be individually adjusted.
1
Select the WASH TEMPERATURE you want to adjust.
2
The wash progress lights show the temperature adjustment possible for that temperature.
Pressing the ADVANCE will cause the wash progress light that is on to change.
Advancing the wash progress light will increase the wash temperature. If you keep
pressing the ADVANCE, the light will scroll back to the coldest setting available for that
wash temperature.
Fig.29 Adjusting the temperature setting
Note: while EXCELLENCE model is shown, the setting of the PRIDE
model is identical
Note: if you have a PRIDE model and still can’t get the temperature you require, advance the
progress light (while in the options adjustment mode) across to SPIN and manually adjust the
flow of the taps.
Rinse options
On the HEAVY DUTY and REGULAR cycles (EXCELLENCE model) and on the HEAVY DUTY,
REGULAR and WOOL cycles (PRIDE model) you
can change the pre-set rinse option.
The default rinse option on these cycles is a spray
rinse followed by a deep rinse. The first step of
the default rinse can be replaced with a short
spin, or a deep rinse, by selecting another option.
If you have a problem with impurities in your
water supply you may get a better result if you
change the rinse option to 2 DEEP rinses. If you
wish to conserve water, change the rinse option
to 1 DEEP rinse. If you want to conserve even
more water, choose the ECO option.
Rinse options
Rinse 1 Rinse 2
MED spin light on
Deep
rinse
Deep
rinse
SLOW spin light on
Short
spin
Deep
rinse
HOLD light on
(default)
Spray
rinse
Deep
rinse
4323_NZ_AU_PAC_GW_MW_Washer_UG11.indd 24 8/10/09 2:45:27 PM