Filter
Top Products
7. Plug the open holes with the plugs
supplied with the instruction booklet.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the
machine is not impeded by carpets,
rugs etc.
Check that the machine does not touch
the wall or other kitchen units. Level the
washing machine by raising or lowering
the feet. The feet may be tight to adjust
as they incorporate a self locking nut,
but the machine MUST be level and
stable.
P1051
P0020
P0256
Any necessary adjustment can be made
with a spanner. Accurate levelling
prevents vibration, noise and
displacement of the machine during
operation. Never place cardboard, wood
or similar materials under the machine to
compensate for any unevenness in the
floor.
Water inlet
Do not use the hose from your
previous machine to connect to the
water supply!
1. Connect the hose to a tap with a
3/4” thread.
2. Set the hose correctly by loosening
the ring nut. After positioning the inlet
hose, be sure to tighten the ring nut
again to prevent leaks.
Always use the hose supplied with the
appliance. The inlet hose must not be
lengthened.
P0021
P1088
34 electrolux installation
132973260 EN.qxd 07/05/2007 15.18 Pagina 34