Filter
Top Products
16 electrolux use
Cancelling a programme
Turn the selector dial to «O» to cancel
a programme which is running. Now
you can select a new programme.
Opening the door after the
programme has started
First set the machine to pause by
pressing the «Start/Pause» button.
If the «Door locked» light goes off,
the door can be opened.
If the «Door locked» light does not
goes off, this means that the machine
is already heating, that the water level
is above the bottom edge of the door
or that the drum is turning. In this case
the door can not be opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to «O».
After few minutes the door can be
opened (pay attention to the water
level and temperature!).
At the end of the programme
The machine stops automatically.
Three flashing “
0.00” will appear on the
display, the buzzer sounds for some
minutes, the Start/Pause light and the
«Door locked» pilot light go off: the
door can be opened.
If the Rinse Hold option have
been selected, the Start/Pause light
goes off, a flashing “
0.00” will appear
on the display, «Door locked» pilot
light is still alight: the door remains
locked to indicate that the water must
be emptied out before opening the
door.
To empty out the water please read
the steps on the Rinse Hold option
paragraph.
At the end of the cycle, turn the
programme selector dial to «O» to
switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out
another wash, close the water tap.
Leave the door open to prevent the
formation of mildew and unpleasant
smells.
132973260 EN.qxd 07/05/2007 15.17 Pagina 16