Filter
Top Products
37
SETTING AXIAL THERMISTOR INPUT
PRESS "MED" TO
ENTER PL #02 MACHINE
SETTINGS.
PRESS "HI"
ONE (1) TIME
TO SCAN UP
TO PL #02
MACHINE
SETTINGS.
PRESS "MED" TO
ENTER AXIAL
THERMISTOR INPUT
PARAMETER.
PRESS "HI" OR
"LO" TO TOGGLE
AXIAL
THERMISTOR
INPUT ON AND
OFF.
PRESS "MED" TO
SELECT AXIAL
THERMISTOR
INPUT AND
ADVANCE TO
NEXT
PARAMETER.
PRESS "MED" TO
ENTER
PROGRAM
MENU.
FROM READY MODE
TOGGLE PROGRAM
SWITCH TO UP
POSITION.
NOTE: PRESS "PAUSE" TO
EXIT PL #02 MACHINE
SETTINGS MEMORY
LOCATION
PROGRAM MODE
PL #01
CONTROL
SETTINGS
PL #02
MACHINE
SETTINGS
SELECT MODEL TYPE
ON
OFF
THERMISTOR
TEMP SETPOINT
100 TO 400 °F
READY, INSERT
0.25 ¢ TO START
AXIAL THERMISTOR
INPUT
PRESS "HI" FOUR (4)
TIMES TO SCAN UP TO
AXIAL THERMISTOR
INPUT SETTING.