Filter
Top Products
11
B. LOCATION REQUIREMENTS
The model ADS-464 dryer requires 36-inches (99 cm) of space on each side of the dryer and 36-inches (99 cm)
of space behind the unit for ease of maintenance and tilting. The dryer must be leveled for proper operation. If
shimming is required, put 9-1/2 x 9-1/2 (24 cm x 24 cm) metal shims under the base feet. The dryer must be
lagged to the floor.
IMPORTANT: Dryer should be located where a minimum amount of exhaust duct will be
necessary.