American Dryer Corp. ADG / MLG-170DR Clothes Dryer User Manual


  Open as PDF
of 40
 
38 American Dryer Corp. 113409-2
SECTION IX
PROCEDURE FOR FUNCTIONAL CHECK
OF REPLACEMENT COMPONENTS
1. Microprocessor Controller (Computer) Board
a. Upon completing installation of the replacement microprocessor controller (computer) board, reestablish power
to the dryer.
b. Start the drying cycle by pressing any of the preset cycles in letters A-F.
c. Verify that the applicable indicator lights on the microprocessor controller (computer) board are lit. (Refer to
the illustration below.)
 previous next