Filter
Top Products
RS3100007 Rev. 0 C–6
Before You Install
Risers
Risers or air cushions may be installed if pipes knock or
pound when flow of water stops. Risers are more
efficient when installed as close as possible to water
supply faucets.
Drain
Drain receptacle must be able to handle hose with at
least 1¼" (32cm) outside diameter. End of drain hose
must be 36" (91.44 cm) above floor, or water may run out
of washer before end of cycle.
Low Standpipe Installation
For standpipe installation below 36" (91.44 cm), install
Siphon Break Kit (part #562P3).
Location
Install washer on a solid floor.
Wood floor constructions may sometimes need to be
reinforced to minimize vibration from unbalanced loads.
Carpet and soft tile surfaces also contribute to vibration
and/or tendency for washer to move slightly during spin
cycle.
Never install washer on a platform or weak support
structure.
DO NOT install washer on carpeted floor.
Use dimensions shown at right to determine space
needed for easy installation and servicing.
Risers
(air cushions)
Water
supply faucets
Washer Dimensions
28" (71.1 cm)
26.9" (68.3 cm)
36.6" (93 cm)
43.6" (110.7 cm)
53.5"
137.1 cm
LID
OPEN 90°
2"
5.1 cm