Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
F232102
10
Delivery Inspection
Upon delivery, visually inspect crate, protective cover,
and unit for any visible shipping damage. If the crate,
protective cover, or unit are damaged or signs of
possible damage are evident, have the carrier note the
condition on the shipping papers before the shipping
receipt is signed, or advise the carrier of the condition
as soon as it is discovered.
Remove the crate and protective cover as soon after
delivery as possible. If any damage is discovered upon
removal of the crate and/or protective cover, advise the
carrier and file a written claim immediately.
Customer Service
If literature or replacement parts are required, contact
the source from whom the washer-extractor was
purchased or contact Alliance Laundry Systems LLC
at (920) 748-3950 for the name of the nearest
authorized parts distributor.
For technical assistance, call any of the following
numbers:
(850) 718-1025
(850) 718-1026
Marianna, Florida
(920) 748-3121
Ripon, Wisconsin
A record of each washer-extractor is on file with the
manufacturer. The serial number decal is located at the
rear of the washer-extractor. Figure 2 shows the
location of the serial number on the decal. Always
provide the washer-extractor’s serial number and
model number when ordering parts or when seeking
technical assistance.