Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
21
F232102
Machine Foundation
Thoroughness of detail must be stressed with all
foundation work to ensure a stable unit installation,
eliminating possibilities of excessive vibration during
extract.
The washer-extractor must be placed on a smooth level
surface so that the entire base of the machine is
supported and rests on the mounting surface. (Do not
support the washer-extractor on only four points.)
NOTE: Do not mount the 250 pound capacity
washer-extractor on wooden floors, above ground
level, or over basements. Installation must be “slab
on grade” or equivalent.
The standard 135 pound capacity washer-extractors do
not require anchoring unless mandated by state or
local codes.
Static and dynamic loads on the floor or foundation are
shown in Table 2. Table 2 can be used as a reference
when designing floors and foundations.
Ensure that the machine is installed on a
level floor of sufficient strength and that
the recommended clearances for
inspection and maintenance are provided.
Never allow the inspection and
maintenance space to be blocked.
SW020
CAUTION
Cabinet Freestanding
Floor Load Data
135 250
Standard Standard
Forward Tilt
Option
Two-Way Tilt
Option
Static floor load 4916
lbs.
(21.8 kN)
9354
lbs.
(41.5 kN)
10,154
lbs.
(45.1 kN)
11,154
lbs.
(49.5 kN)
Static pressure 187
lbs/ft
2
(8.9 kN/m
2
)
245
lbs/ft
2
(11.7 kN/m
2
)
217
lbs/ft
2
(10.4 kN/m
2
)
232
lbs/ft
2
(11.1 kN/m
2
)
Dynamic floor load 460
lbs.
(2.05 kN)
925
lbs.
(4.12 kN)
925
lbs.
(4.12 kN)
925
lbs.
(4.12 kN)
Maximum dynamic load 460
lbs.
(2.05 kN)
925
lbs.
(4.12 kN)
925
lbs.
(4.12 kN)
925
lbs.
(4.12 kN)
Dynamic pressure 17.8 lbs/ft
2
(0.85 kN/m
2
)
24.2 lbs/ft
2
(1.16 kN/m
2
)
24.2 lbs/ft
2
(1.16 kN/m
2
)
24.2 lbs/ft
2
(1.16 kN/m
2
)
Table 2