© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Maintenance
F232201
30
Daily Preventive Maintenance
Checklist
Machine ____________________________
Operator ___________________________
Week of: ________________
Days
Checks 1 2 3 4 5 6 7
Observe All Safety Warnings!
Disconnect power to the machine before performing the daily maintenance procedures.
Beginning of Day
1. Inspect water inlet valve hose connections on the back of the
washer-extractor for leaks.
2. Inspect steam hose connections for leaks, where applicable.
3. Verify that insulation is intact on all external wires and that all
connections are secure.
4. Inspect door lock and interlock before starting operation:
a. Attempt to start the washer with door open.
b. Close the door without locking it and attempt to start the washer.
c. Close and lock the door, start a cycle, and attempt to open the
door while the cycle is in progress.
5. Inspect all water recirculation pipe connections, if applicable.
End of Day
1. Clean the AC drive box filter(s).
2. Clean the door gasket of all foreign matter.
3. Clean automatic supply dispenser and lid.
4. Clean the washer’s top, front, and side panels.
5. Leave loading door open at the end of each day to allow moisture to
evaporate.
6. Clean water recirculation filter, if applicable.
NOTE: Unload the machine promptly
after each completed cycle
to prevent moisture buildup. Leave
loading door open after each completed cycle to allow moisture to evaporate.