Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
25
F232201
Maintenance
Routine maintenance maximizes operating efficiency
and minimizes downtime. The maintenance
procedures described below will prolong the life of the
machine and help prevent accidents.
Daily, weekly, monthly, and quarterly checklists are
provided at the end of this section. Laminate the
checklists to preserve them for repeated copying.
Operators and technicians are encouraged to add
checks specific to their washer-extractor’s particular
application. Where possible, space is provided on the
checklists for this purpose.
The following maintenance procedures must be
performed regularly at the required intervals.
Daily
Beginning of Day
1. Inspect water inlet valve hose connections on the
back of the washer-extractor for leaks.
2. Inspect steam hose connections for leaks (where
applicable).
3. Verify that insulation is intact on all external
wires and that all connections are secure. If bare
wire is evident, call a service technician.
4. Check door interlock before starting operation:
a. Attempt to start the washer with the door
open. The washer should not start with the
door open.
b. Close the door without locking it and attempt
to start the washer. The washer should not
start with the door unlocked.
c. Close and lock the door and start a cycle.
Attempt to open the door while the cycle is in
progress. The door should not open.
If the door lock and interlock are not functioning
properly, call a service technician.
5. If the washer-extractor is equipped with the
Premium Wet Clean Module, inspect all water
recirculation pipe connections and ensure that
they are tight and do not leak.
Be careful when handling sheet-metal
parts. Sharp edges can cause personal
injury. Wear safety glasses and gloves,
use the proper tools, and provide
adequate lighting.
SW035
WARNING
Replace all panels that are removed to
perform service and maintenance
procedures. Do not operate the machine
with missing guards or with broken or
missing parts. Do not bypass any safety
devices.
SW019
CAUTION
To reduce the risk of electrical shock,
serious injury or death, disconnect the
electrical power to washer-extractor before
examining the wiring.
W636
WARNING