58 RXiIIIPlus User Guide 6/21/2004 23063L-001 Rev. 2
Front Panel Controls
Front Panel LCD
RTC TIME
RTC (Real-time clock) Time
This parameter allows you to set the time following the convention selected in
IDLE
DISPLAY
.
1. Press the left oval to move to the next digit position.
2. Press the right oval to increase the value of the digit.
RFID TEST
QUICK SLOW
RFID Test
In both versions of this test, the printer attempts to read and write to a transponder. In the
slow test, the printer also checks the reader version number. If the printer fails the test, the
front panel displays an error message.
1. Place an RFID label over the reader (no movement occurs with the test).
2. Press SELECT to select the parameter.
3. Press MINUS (–) to select
QUICK
.
OR
Press PLUS (+) to select
SLOW
.
4. If necessary, press PLUS (+) to select
CONTINUE
.
5. Press SELECT to deselect the parameter.
RFID TAG
TYPE
Detect/Specify RFID Tag Type
Default: AUTO DETECT
Selections: AUTO DETECT, TAG-IT, ICODE, PICO, ISO15693, EPC, NONE
Note • For the RXiIIIPlus, leave this parameter set to AUTO DETECT.
RFID ERR
STATUS
RFID Error Status
If an error condition exists, a message may be displayed here.
LANGUAGE
Selecting the Display Language
This parameter allows you to change the language used on the LCD.
• Press the right or left oval to display other choices.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian, Portuguese, Swedish,
Danish, Spanish 2, Dutch, Finnish, Japanese
Table 5 • Printer Parameters (Sheet 15 of 15)
Parameter Action/Explanation
