Zebra Technologies XiIIIPlus Manual

A SERVICE OF

next previous

28 RXiIIIPlus User Guide 6/21/2004 23063L-001 Rev. 2

Printer Operation

Load the Printer

5. Pull the ribbon leader over the printhead and above the top roller (Figure 21).

Figure 21 • Threading Ribbon Past Printhead and Platen Roller

6. Bring the ribbon leader and ribbon under the ribbon take-up spindle, and wrap them

around the spindle. Figure 22 shows the ribbon leader wrapped around the ribbon take-up

spindle.

Figure 22 • Wrapping Ribbon around Spindle

7. Turn the ribbon take-up spindle counterclockwise until the ribbon stays on it, as shown.

1

Ribbon leader

2

Printhead

1

Ribbon leader

2

Ribbon take-up spindle

1

2

1

2