48 RXiIIIPlus User Guide 6/21/2004 23063L-001 Rev. 2
Front Panel Controls
Front Panel LCD
LIST BAR
CODES
List Bar Codes
• Press the right oval to print a label that lists the available bar codes in the printer.
LIST IMAGES
List Images
• Press the right oval to print a label that lists the available images stored in the printer’s
RAM, Flash memory, optional EPROM, or optional memory card.
LIST FORMATS
List Formats
• Press the right oval to print a label that lists the available formats stored in the printer’s
RAM, Flash memory, optional EPROM, or optional memory card.
LIST SETUP
List Setup
• Press the right oval to print a label that lists the current printer configuration. (Same
label as shown in Print a Printer Configuration Label on page 31.)
LIST ALL
List All
• Press the right oval to print labels that list the available fonts, bar codes, images,
formats, and the current printer configuration.
FORMAT CARD
A B
Format Memory Card
Caution • Perform this operation only when it is necessary to erase all previously
stored information from the memory card.
1. When the LCD displays
INITIALIZE CARD
, press the left oval to select the A
memory (internal CompactFlash) or the right oval to select B memory (PCMCIA
card). (If you are prompted for a password, enter your password using the instructions
in Password-Protected Parameters on page 43.)
The front panel LCD asks
ARE YOU SURE?
.
2. Do you wish to continue?
• Press the left oval to select
NO
to cancel the request and return to
INITIALIZE
CARD
prompt.
• Press the right oval to select
YES
and begin initialization.
FORMATTING CARD
displays.
When formatting is complete,
INITIALIZE CARD
displays.
Note • Depending on the amount of memory in the memory card, initialization may take
up to three minutes to complete.
Table 5 • Printer Parameters (Sheet 5 of 15)
Parameter Action/Explanation
