Interface Settings
55
2
❖ IPv6 Stateless Setting
Specify IPv6 Stateless Setting.
• Effective
• Invalid
❖ DNS Configuration
Make settings for the DNS server.
When you select [Specify], enter the DNS server IPv4 address as
“xxx.xxx.xxx.xxx”(“x” indicates a number).
• Auto-Obtain (DHCP)
•Specify
• DNS server 1: 000.000.000.000
• DNS server 2: 000.000.000.000
• DNS server 3: 000.000.000.000
❖ DDNS Configuration
Specify the DDNS settings.
• Effective
• Invalid
❖ Domain name
Specify the domain name.
• Auto-Obtain (DHCP)
•Specify
❖ WINS Configuration
Specify the WINS server settings.
If [On] is selected, enter WINS server IPv4 address as “xxx.xxx.xxx.xxx. (“x”
indicates a number)”
If DHCP is in use, specify the [Scope ID].
Enter a [Scope ID] using up to 31 characters.
•On
• Server 1: 000.000.000.000
• Server 2: 000.000.000.000
•Scope ID
• Off
❖ Effective Protocol
Selects the protocol to use in the network.
•IPv4: Effective/Invalid
• IPv6: Effective/Invalid
•NetWare: Effective/Invalid
• SMB: Effective/Invalid
• AppleTalk: Effective/Invalid
