Network Settings
25
1
Note
❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive].
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending e-mail with IEEE 802.11b
(wireless LAN).
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Menu User Tool Setting Requirements
Interface Setting/Network Machine IPv4 Address Necessary
Interface Setting/Network IPv4 Gateway Address Necessary
Interface Setting/Network DNS Configuration As required
Interface Setting/Network DDNS Configuration As required
Interface Setting/Network Domain As required
Interface Setting/Network WINS Configuration As required
Interface Setting/Network Effective Protocol Necessary
Interface Setting/Network LAN Type Necessary
Interface Setting/Network Permit SNMPv3 Communictn. As required
Interface Setting/Network Permit SSL/TLS Comm. As required
Interface Setting/Network Host Name As required
Interface Setting/IEEE 802.11b
Communication Mode Necessary
Interface Setting/IEEE 802.11b
SDID Setting As required
Interface Setting/IEEE 802.11b
Channel As required
Interface Setting/IEEE 802.11b
Security Type As required
Interface Setting/IEEE 802.11b
Communication Speed As required
File Transfer Setting SMTP Server Necessary
File Transfer Setting SMTP Authentication As required
File Transfer Setting POP before SMTP As required
