Connecting the Machine
24
1
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ When [POP before SMTP] is set to [On], also make setting for [Reception Protocol]
and [POP3/IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for sending e-mail with IEEE 1394 inter-
face cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Menu User Tool Setting Requirements
Interface Setting/IEEE 1394
IPv4 Address Necessary
Interface Setting/IEEE 1394
DDNS Configuration As required
Interface Setting/IEEE 1394
Host Name As required
Interface Setting/IEEE 1394
Domain Name As required
Interface Setting/IEEE 1394
WINS Configuration As required
Interface Setting/IEEE 1394
IPv4 over 1394 Necessary
Interface Setting/Network IPv4 Gateway Address Necessary
Interface Setting/Network DNS Configuration As required
Interface Setting/Network Effective Protocol Necessary
File Transfer SMTP Server Necessary
File Transfer SMTP Authentication As required
File Transfer Setting POP before SMTP As required
File Transfer Setting Reception Protocol As required
File Transfer Setting POP3/IMAP4 Settings As required
File Transfer Setting Key Operator's E-mail Add. As required
File Transfer Setting E-mail Communication Port As required
File Transfer Setting Scanner Resend Time As required
File Transfer Setting Scanner Resend setting As required
