Network Settings
29
1
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with ether-
net cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
❒ If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.54 “Interface Settings”
p.63 “File Transfer”
Menu User Tool Setting Requirements
Interface Setting/Network Machine IPv4 Address Necessary
Interface Setting/Network IPv4 Gateway Address As required
Interface Setting/Network DNS Configuration As required
Interface Setting/Network DDNS Configuration As required
Interface Setting/Network Domain As required
Interface Setting/Network WINS Configuration As required
Interface Setting/Network Effective Protocol Necessary
Interface Setting/Network Ethernet Speed As required
Interface Setting/Network LAN Type Necessary
Interface Setting/Network Permit SNMPv3 Communictn. As required
Interface Setting/Network Permit SSL/TLS Comm. As required
Interface Setting/Network Host Name As required
File Transfer Setting Delivery Option As required
File Transfer Setting Fax RX File Transmission As required
File Transfer Setting Scanner Resend Time As required
File Transfer Setting Scanner Resend Setting As required
