141
6. Scanner Features
This chapter describes user tools in the Scanner Features menu.
Scan Settings
This section describes the user tools in the Scan Settings menu under Scanner
Features.
❖ Default Scan Settings
Various basic settings (resolution and scan size) can be set. You can register
the scan settings in the same way as specifying them. For details, see “Speci-
fying Send Options”, Scanner Reference.
•Resolution
• 100 dpi
• 200 dpi
• 300 dpi
• 400 dpi
• 600 dpi
•Scan Size
• Paper size for setting
[Auto Detect], [A3L], [B4 JISL], [A4K], [A4L], [B5 JISK], [B5 JISL],
[A5K], [A5L], [11×17L], [8
1
/
2
×14L], [8
1
/
2
×13L], [8
1
/
2
×11K], [8
1
/
2
×11L],
[5
1
/
2
×8
1
/
2
K], [5
1
/
2
×8
1
/
2
L], [Custom Size]
Custom size paper setting will be as follows: Vertical: 105.0 to 297.0 mm
(4.2 to 11.6 inch), Horizontal: 128.0 to 432.0 mm (5.1 to 17.0 inch)
❖ Original Setting
This setting is available only when you have installed the optional ARDF.
Set the default for whether originals are one-sided or two-sided and if two-
sided, the relationship between those sides. When the originals are always the
same, set this for the default to make operation easier.
• 1 Sided Original
• 2 Sided Orig. (Top to Top)
• 2 Sided Orig. (Top to Bottom)
