A SERVICE OF

logo

3-19
BIOS Setup
Assign IRQ For VGA/USB
Set to [Enabled] allows BIOS to assign an IRQ to VGA card/USB device. Choose
[Disabled] if you want to release the IRQ. Setting options: [Enabled], [Disabled].
PCI Latency Timer (CLK)
This item controls how long each PCI device can hold the bus before another
takes over. When set to higher values, every PCI device can conduct transactions
for a longer time and thus improve the effective PCI bandwidth. For better PCI
performance, you should set the item to higher values. Give a DEC value by
entering a value between [0] to [255].