381
Multiple-Group Analysis
Fitting the Models
E From the menus, choose Analyze > Calculate Estimates.
The panel to the left of the path diagram shows that two models could not be fitted to
the data. The two models that could not be fitted, the
Unconstrained model and the
Measurement weights model, are unidentified.
Viewing the Text Output
E From the menus, choose View > Text Output.
E In the navigation tree of the output viewer, expand the Model Fit node, and click CMIN.
This displays some fit measures for the seven automatically generated and identified
models, along with fit measures for the saturated and independence models, as shown
in the following CMIN table:
Model NPAR CMIN DF P CMIN/DF
Measurement intercepts 22 34.775 6 0.000 5.796
Structural weights 21 36.340 7 0.000 5.191
Structural intercepts 20 84.060 8 0.000 10.507
Structural means 19 94.970 9 0.000 10.552
Structural covariances 18 99.976 10 0.000 9.998
Structural residuals 17 112.143 11 0.000 10.195
Measurement residuals 13 122.366 15 0.000 8.158
Saturated model 28 0.000 0
Independence model 16 682.638 12 0.000 56.887
