Avaya, Inc. - 75 - PARTNER ACS 1600 DSL module User Guide
C. Command
Line Interface
For future implementation.
Displays the command line interface, which supports the
following syntax and commands.
Command line syntax
The command syntax is:
COMMAND <required parameters> (optional parameters)
For example:
Set wan ip address 192.3.4.5 255.255.255.02001
The required parameters are the ip address
<192.3.4.5> and the netmask <255.255.255.0>.
The optional parameters are the slot (2), interface(0),
port(0) and connection(2).
The command and its parameters are NOT case sensitive.
Commands
The following are the commands that are currently supported:
exit – quits the command line interface and returns to
the menu system.
quit – quits the command line interface and returns to
the menu system.
set ip route <IPRoute> <netmask>
<IPGatewayAddress> - sets a static IP route.
set ip default route <DefautltIPaddress> - sets the
default IP address.
set wan ip address <IPaddress> <netmask> (slot)
(interface) (port) (connection) – sets the WAN IP
address. If you do not enter any optional parameters, it
finds the first available slot, interface, port and
connection.
set lan ip address <IPaddress> <netmask> (slot)
(interface) (port) (connection) – sets the LAN IP
address. If you do not enter any optional parameters, it
finds the first available slot, interface, port and
connection.
set wan datalink <framerelay or atm> (slot)
(interface) (port) – sets the datalink protocol to Frame
Relay or ATM. . If you do not enter any optional
parameters, it finds the first available slot, interface and
port.
set wan framerelay dlci <dlci number> <1490 or
1483> (slot) (interface) (port) – sets the Frame Relay
