Avaya, Inc. - 19 - PARTNER ACS 1600 DSL module User Guide
Running the Telnet program
To use a Telnet program to log on to a PARTNER ACS 1600
DSL module
1. Open the Telnet program.
2. Type the IP address of the port that you configured in
steps 1-6, press CONNECT, and then press any key.
The log on message displays.
Enter Login ID >
3. Type your User ID, and press ENTER.
The following are the default User IDs and passwords:
Access Level User ID Password
User User TBD
Network Administrator NetMan TBD
For more information, see the "Administration" chapter.
The password message displays.
Enter Password >
4. Type your password, and the press ENTER.
The Main Menu displays.
*****************************************
* Main Menu *
*****************************************
1. Reports Menu
2. Configure IP Router
3. Configure Bridge
5. Configure WAN
6. Configure LAN
7. Configure SNMP
8. Configure Login
9. System Utilities
D. Configure DHCP Server
N. Configure NAT
T. Derived Timing
Z. Diagnostics Menu
C. Command Line Interface
P. VoicePath Configure
For more information on the menus, submenus and
commands on the Main Menu, see the “Menu interface”
chapter.
