Avaya, Inc. - 37 - PARTNER ACS 1600 DSL module User Guide
• Filter Destination Port High
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt. To accept this value, press
ENTER.
C. Copy filter operations menu
Displays the IP Filter Copy to Buffer Menu, which
contains the following commands for all filters of the
type that you set with the Toggle input or output type
filters to view/edit command.
C. Copy a filter of the chosen type to the
buffer
Copies the filter that you select to the buffer.
Type the number of the filter to copy, and then
press enter.
D. Display the filter in the copy buffer
Displays the following information about the filter
in the copy buffer:
• num – number of the filter
• state – Idle or Active
• action – Pass or Discard
• srcLwP - Filter Source Port Low – TCP
or UDP packets only
• srcHiP - Filter Source Port High - TCP or
UDP packets only
• source.ip.addr.low - Filter Destination
IP Low Address
• source.ip.addr.high - Filter Source IP
High Address
• proto - Filter protocol – IP, ICMP, IGMP,
TCP, UDP
• mask – ICMP or TCP only
• dstLwP - Filter Destination Port Low
• dstHiP - Filter Destination Port High
• dest.ip.addr.low - Filter Destination IP
Low Address
• dest.ip.addr.high - Filter Destination IP
High Address
