Avaya, Inc. - 63 - PARTNER ACS 1600 DSL module User Guide
You must restart the PARTNER ACS 1600 DSL
module to load the new version of ACOS. For more
information on restarting the PARTNER ACS 1600 DSL
module or on upgrading your software using TFTP, see
the “PARTNER ACS 1600 DSL module basics”
chapter.
X. Update Entire System
Uses TFTP to download files to update the IAD.
A. File Transfer Utilities
Displays the File Transfer Method submenu,
which contains the following commands that
download a file to the file system stored in Flash
memory in the PARTNER ACS 1600 DSL
module:
1. Receive via TFTP
2. Send or Receive via XMODEM
Select your choice.
I. Interworking
Connections
Displays the Connections Menu, which contains the
following commands. This menu only displays when an USI
Interface is installed.
You must restart the PARTNER ACS 1600 DSL module for
any changes to take effect. For more information the
PARTNER ACS 1600 DSL module, see the “PARTNER ACS
1600 DSL module basics” chapter.
1. Add Interworking Connection
Follow the on-screen messages to create an interworking
connection.
Questions below may or not display, depending on the options
that you select.
• Type the number of the NIM with the datalink protocol =
Frame Relay.
• Select the port to use.
• Type the number of the NIM with the datalink protocol =
ATM.
• Select the port to use.
