Avaya, Inc. - 36 - PARTNER ACS 1600 DSL module User Guide
A. Append a new or buffered filter to the end of the
list
Adds a new filter of the type set with the Toggle input
or output type filters to view/edit command to the
end of list that displays when you select Display all
filters of the chosen type.
Type Y, and then follow the on-screen messages to
enter the following information:
• Filter state – Idle or Active
• Filter action – Pass or Discard
• Filter protocol – IP, ICMP, IGMP, TCP, UDP
• Filter Source IP Low Address
• Filter Source IP High Address
• Filter Source Port Low
• Filter Source Port High
• Filter Destination IP Low Address
• Filter Destination IP High Address
• Filter Destination Port Low
• Filter Destination Port High
The PARTNER ACS 1600 DSL module displays a
default or last-used value in parentheses to the left of
the command prompt. To accept this value, press
ENTER.
E. Edit filter of the chosen type
Displays all filters of the type that you set with the
Toggle input or output type filters to view/edit
command that you can edit.
Type the number of the filter to edit, and then follow the
on-screen messages to enter the following information:
• Filter state – Idle or Active
• Filter action – Pass or Discard
• Filter protocol – IP, ICMP, IGMP, TCP, UDP
• Filter Source IP Low Address
• Filter Source IP High Address
• Filter Source Port Low – TCP or UDP packets
only
• Filter Source Port High - TCP or UDP packets
only
• Filter Destination IP Low Address
• Filter Destination IP High Address
• Filter Destination Port Low
