9
The iStep Aetrex V5 F.I.T. and iStep Aetrex V5
versions will make recommendations of the
Aetrex insert.
The iStep Lynco V5 F.I.T. and
iStep Lynco V5 versions will recommend the
Lynco insert. Launch the program by double-
clicking on the appropriate icon. The main
screen will open, with a Flash animation.
Registering your software
In order to better serve our customers, we
ask that you register your copy of the iStep
software with us. At the main screen, click
on the iStep logo, and then select choice
#11, ‘Registration.’ Contact iStep Technical
Support at 1-800-644-3514 with your iStep
Code to receive the proper Registration
Code. Select ‘Confirm’ and registration is
complete
(Figure 2J).
Configuring your iStep Program
The iStep program can be configured and
customized for your business needs. You can
enter your company information to appear on
every test printed, as well as a customized
coupon. Technical details can also be adjusted.
However, iStep arrives preconfigured with
default data. Any changes to the system
configuration should be done only with the
direct assistance of an Aetrex representative.
To begin, click on the iStep logo located at
the upper right corner of the screen. The
iStep
(Figure 2K) menu will appear.
Exiting the Program
To exit the iStep program, click on the logo and
select #12, ‘Exit Program.’ When prompted,
enter the iStep Code in order to exit.
The code
is 0007.
Manual
Note: The flash ani-
mation can be
turned off. See con-
figuration chapter 4.
Note: Don’t f
orget
to remove any
disks that are in
y
our drives before
restar
ting the
computer
.
Fig. 2H
Fig. 2I
Fig.
2K
Fig.
2J
