21
foot scan results. Program default is 2D Low
Resolution, 15 Colors.
Display Size: Determines whether the rec
-
ommended shoe size is displayed in
European or US sizes, or both.
Intro Screen: Allows the selection of more
than six different introduction screens, both
with and without flash animations. Select a
screen and click on ‘Preview’ to see how the
screen will appear.
Serial Port Settings (Figure 2M)
Serial Port: The iStep program needs to
know which serial port number the hardware
is attached to. Choose the appropriate port
number by clicking on the drop down. The
default is Com Port 1.
Find Serial Port: If you need to know which
serial port your iStep hardware device is
connected to, click the ‘Scan’ button. The
iStep program will search your computer for
all valid serial ports and display them. If you
have chosen the wrong serial port, you will
get an error message indicating that you are
not connected.
Set INI: The ‘Set INI’
fields are for use by
iStep Technical Support only. Making unau-
thorized changes can ruin the iStep installa-
tion and cause data loss. Please do not
modify these settings without the direction or
guidance of an iStep technician.
Manual
Note: You cannot
move a letter
over or past an
adjacent letter
.
Fig. 4L Fig. 4M
